How To Register A New Wires X Node

Launch the Wires-ten software.
You volition exist prompted by this screen (come across below). You should see your HRI-200's serial number machine-populated in Serial Number box. Input your Node/Room ID. Click ID entry. The remaining blank fields volition be auto-populated with your basic information. Click Okay.
If you don't see your HRI-200 serial number auto-populated in the "Series No." box, please check/reinstall your driver, make sure that it's properly configured. In most cases, problems are from bad driver installation and/or Windows calculator.

Check your "Tool > Port bank check" tab if they are displaying "OK".
If you lot see that all ports have "OK" marks (see picture show beneath), yous're all set. Click "Shut".
If y'all see just one "OK" (commonly Node control), please bank check your estimator settings - turn off firewall, anti-virus program, other programs that could block computer/internet traffic.
If you see an all cerise "NG" prompt, cheque your calculator and/or VPN settings.

Configure Transceiver section: Select "RX:DIGITAL - TX:DIGITAL" from the dropdown menu. Gear up your desired frequency VHF/UHF. Select Power to Low (if you're only using information technology at abode) or Medium (if you want to use it as an Access Bespeak with an external antenna).

Configure Settings:

Wires ID Information: You may change your "User ID", merely click on "User ID Change", add together comment, click Confidential if you desire to hibernate your ID, select QSL exchange if you lot're into digital QSL carte exchanges, add comment or other info.

Location Settings: Add together your station location, click on "Evidence position data".

Round QSO room settings: Add your desired "Room Name", comment, click on "QSL exchange" to upload your electronic QSL card, add "Room information". Make your room "Active" past clicking on "Setup", check "Room Active", add together "Room ID", then click on "Room Activation".

Phone call settings: Bank check on the desired options, add together a default Room ID for your "Return to Room" field (Your node will always go back to that room when your connection with other rooms are inactive.)